Local file conversion
OBJ to GLB Converter
Convert a static OBJ into a GLB locally. Select the OBJ together with its referenced MTL and supported local images when materials are needed. The output packages compatible imported geometry and material data; review the downloaded file before use.
Last updated
- Model bytes stay local
- OBJ → GLB
- Maximum 50 MB total
Select one OBJ model and its local MTL and image files together. Remote links and archives are not loaded. Use PNG, JPEG or WebP for textures.
Your separate download
The converted file will appear here. Choose your model, then select Convert to GLB.
Up to 500,000 triangles and 512 mesh parts. GLB exports are uncompressed and textures are limited to 4096 pixels per side. Output limit: 100 MB. Unsupported extensions or texture formats can require a new export from your modeling tool.
How to convert OBJ and MTL to GLB
Extract the OBJ package on your device. Select one .obj file with its referenced .mtl and local PNG, JPEG or WebP images. Keep filenames unchanged so material references can resolve. The total selection must be 50 MB or less.
Run the conversion and download the GLB. Open it again in the GLB viewer and compare the geometry and material placement with the OBJ. Keep the original files so you can correct missing resources or change the source later.
- Find the OBJ, referenced MTL and texture images.
- Select the complete local set in one selection.
- Convert the supported static asset and download the GLB.
- Review the GLB in the application that will use it.
A complete local package matters more than the extension
An OBJ can refer to material names without containing the full material definition. The MTL can then refer to separate image files. Selecting only the OBJ may be sufficient for a geometry-only export, but it does not supply material data that was omitted from the selection.
Use a portable export with local references. Remote texture URLs are blocked. If the asset uses unsupported image types, convert them in the source workflow and update the material references there. Do not substitute an unrelated image simply to clear a missing-file error.
What the GLB output can preserve
The converter exports supported static geometry and compatible imported materials. A GLB can package those supported resources into one file for a receiving workflow. Inspect normals, UV mapping and material assignments after export.
OBJ and MTL do not provide the full feature set of every glTF material. Conversion cannot add a rig, recover animation or recreate a procedural shader. It also cannot correct missing UV coordinates or produce texture detail that was absent from the source.
Check scale, pivots and orientation after conversion
A model can look correct while carrying a scale or orientation that does not suit your scene. Automatic viewer framing does not establish real-world units. Compare the converted asset with a known object in the destination application.
The conversion is a delivery step. It does not certify clean topology, collision behavior, watertightness or a production performance budget. Review those requirements separately before you replace an existing asset with the converted copy.
If the material is missing or the export fails
Read the error before selecting the same unchanged files again. Include a missing MTL or texture, preserve the referenced names, or create a clean source export. Unsupported or incomplete geometry requires a fix in the authoring application.
The 50 MB limit applies to the whole selected set. Many large textures can use substantial browser memory after decoding. Use an appropriately sized export for inspection and retain the full original. A successful GLB download does not guarantee a smaller byte count than the original OBJ package.
Keep the conversion within the supported limits
The selected model and resource files must total no more than 50 MB. Conversion also limits the parsed asset to 500,000 triangles and 512 visible mesh parts. Point and line geometry and instanced meshes are outside this export workflow. A model that opens in a viewer can still exceed a converter limit.
GLB output is uncompressed. Supported exported textures can be resized to a maximum of 4096 pixels per side, so compare fine image detail after conversion. Texture-count and decoded-pixel limits can also reject an unusually large material set. The result must be no larger than 100 MB. A successful conversion does not guarantee a smaller file.
Conversion questions
Can I convert OBJ and MTL together?
Yes. Select the OBJ, its referenced MTL and required local images together. Compatible imported material data can be included in the GLB.
Can I convert an OBJ without textures?
A valid geometry-only OBJ can be converted. If the OBJ references required resources that are missing, provide them or export a clean geometry-only copy. The converter does not invent missing materials.
Will the GLB preserve every MTL setting?
No. Only compatible imported and exported material data is retained. Review the actual result instead of assuming exact material parity.
Will the result be smaller?
Not necessarily. Geometry encoding, material data and embedded image bytes affect the result. Compare the downloaded size with the complete input package.
Does MeshCrate upload my selected files?
The tool reads selected model files and their selected dependencies in your browser. It does not upload those file bytes. The website still loads application code, fonts and public assets, and it can send usage events. Local file processing does not mean the whole website is offline. Remove the file or close the tab when you finish.
What is the file size limit?
The total selected model and dependency files must be 50 MB or less. A small file can still require substantial browser memory after parsing. If loading fails, close other demanding tabs or export a smaller model. Archives and remote model URLs are not accepted.